排序方式： 共有7条查询结果，搜索用时 15 毫秒
1
1.
Polarimetric synthetic aperture radar(SAR) oil spill detection parameters conformity coefficient(μ), Muller matrix parameters(|C|, B_0), the eigenvalues of simplified coherency matrix(λ_(nos)) and the influence of SAR observing parameters, ocean environment and noise level are investigated. Radarsat-2 data are used to make systematic analysis of polarimetric parameters for different incidences, wind speeds, noise levels and the ocean phenomena(oil slick and look likes). The influence of the SAR observing parameters, the ocean environment and the noise level on the typical polarimetric SAR parameter conformity coefficient has been analyzed. The results indicate that conformity coefficient cannot be simply used for oil spill detection, which represents the image signal to the noise level to some extent. When the signals are below the noise level for the oil slick and the look likes, the conformity coefficients are negative; while the signals above the noise level corresponds to positive conformity coefficients. For dark patches(low wind and biogenic slick) with the signal below the noise,polarization features such as conformity coefficient cannot separate them with oil slick. For the signal above the noise, the oil slick, the look likes(low wind and biogenic slick) and clean sea all have positive conformity coefficients, among which, the oil slick has the smallest conformity coefficient, the look likes the second, and the clean sea the largest value. For polarimetric SAR data oil spill detection, the noise plays a significant role. So the polarimetric SAR data oil spill detection should be carried out on the basis of noise consideration. 相似文献
2.
船舶压载水携带的微生物对目的海域的污染问题亟待解决。采用电解法,以渤海湾的海水为处理对象,以炭纤维材料为阴极,分别以碳棒、碳板和炭纤维为阳极,首先考察了施电2.00 V下3种阳极炭材料对应的杀菌效果,进而重点考查了碳板为阳极材料时施加不同槽压下的杀菌性能,并对其杀菌机理进行初步分析。结果表明,3种阳极材料对应的杀菌效果先后顺序为碳棒碳板炭纤维,各自的杀菌效果均较为明显,施电18 min时碳板对应的灭活率可达100%;以碳板为阳极时,施加槽压越高杀菌效果越显著,本研究范围内以1.81 V为佳,施电18 min时灭活率在99%以上;不同槽压下体系中氯离子浓度和p H都随时间整体呈减小趋势,一定程度上可用于解释杀菌作用过程。研究结果可为电解法处理船舶压载水提供参考和借鉴。 相似文献
3.
The behaviour of spudcan foundations during the installation and preloading in two-layer sand sediments was investigated through large deformation finite element (LDFE) analyses. The LDFE analyses were carried out using the coupled Eulerian-Lagrangian approach, modifying Mohr-Coulomb soil model to capture hardening and subsequent softening effects of sand. Parametric analyses were undertaken varying the top layer thickness, relative density of sand and spudcan diameter. Both loose to medium dense-over-dense and dense-over-loose to medium dense sand deposits were explored. The results showed that, for the investigated relatively thin top layer thickness of ≤ 5 m, spudcan behaviour was dictated by the bottom sand layer with a minimal influence of the top layer. For assessing the penetration resistance profile in two-layer sands, the performance of the ISO, SNAME, InSafeJIP, and other existing theoretical design methods were evaluated. 相似文献
4.
This paper deals with the effects of foundation embedment on the floor response spectra of big base isolated structures such as nuclear power plants. Analyses of a finite element model, representative of a real nuclear power plant, have been carried out. It has been demonstrated that, in agreement with previous work, base rocking excitation, induced by soil–structure interaction, may amplify the non-isolated modes׳ response and thus it must not be overlooked. 相似文献
5.
The key point for rational allocation of emergency resources is to match the oil spill response capacity with the risk of oil spill. This paper proposes an innovative risk-based model for quantitative regional emergency resource allocation, which comprehensively analyzes the factors such as oil spill probability, hazard consequences, oil properties, weathering process and operation efficiency, etc. The model calculates three major resources, i.e., mechanical recovery, dispersion and absorption, according to the results of risk assessment. In a field application in Xiaohu Port, Guangzhou, China, and the model achieved scientific and rational allocation of emergency resources by matching the assessed risk with the regional capacity, and allocating emergency resources according to capability target. The model is considered to be beneficial to enhancing the resource efficiency and may contribute to the planning of capacity-building programs in high-risk areas. 相似文献
6.
An oil spill forecast system for of fshore China was developed based on Visual C++. The oil spill forecast system includes an ocean environmental forecast model and an oil spill model. The ocean environmental forecast model was designed to include timesaving methods, and comprised a parametrical wind wave forecast model and a sea surface current forecast model. The oil spill model was based on the "particle method" and fulfi lls the prediction of oil particle behavior by considering the drifting, evaporation and emulsifi cation processes. A specifi c database was embedded into the oil spill forecast system, which contained fundamental information, such as the properties of oil, reserve of emergency equipment and distribution of marine petroleum platform. The oil spill forecast system was successfully applied as part of an oil spill emergency exercise, and provides an operational service in the Research and Development Center for Off shore Oil Safety and Environmental Technology. 相似文献
7.
Oil droplet size distribution(ODSD) plays a critical role in the rising velocity and transport of oil droplets in subsurface oil releases. In this paper, subsurface oil release experiments were conducted to study ODSD under different experimental conditions in a laboratory water tank observed by two high-speed cameras in March and April 2017. The correlation formulas Oh=10.2 Re~(–1) and Oh=39.2 Re~(–1)(Re represents Reynolds number and Oh represents Ohnesorge number) were established to distinguish the boundaries of the three instability regimes in dimensionless space based on the experimental results. The oil droplet sizes from the experimental data showed an excellent match to the Rosin–Rammler distribution function with determination coefficients ranging from 0.86 to 1.00 for Lvda 10-1 oil. This paper also explored the influence factors on and change rules of oil droplet size. The volume median diameter d50 decreased steadily with increasing jet velocity, and a sharp decrease occurred in the laminar-breakup regime. At Weber numbers(We) 100, the orifice diameter and oil viscosity appeared to have a large influence on the mean droplet diameter. At 100We1 000, the oil viscosity appeared to have a larger influence on the relative mean droplet diameter. 相似文献
1